Balkene Home EVANT 64013, Руководство пользователя, Страница: 10 / 14

Insert Cam Bolts 1 into the indicated holes
in the Drawer Front S . Use a Phillips-head
screwdriver to tighten the threads fully
into the panels.
Attach the Handle ? to the outside of the
Drawer Front using 2 Screw Bolts ? as
shown.
1
Cam Bolt x4
?
Handle x 1
?
Screw Bolt (4x 2 0mm) x2
”Á>UÁ¿É¸¿t”µ¿>¸¸ƒ¸Á>Ug[¿¿£l½½¤¿‘lu‚¼l¼¼¿¿N¿¿ÑÑѦ
L>Š‰gg”g¦U”
¿ 10
ASSEMBLY
14
Carefully turn the unit to lay face-
down. Position the Cabinet Backers
J
to cover the back of the compartments
at either end of the unit. Be sure to
leave the Anchor Brackets
? exposed.
Position the Cord Backer K to cover
the top center compartment. Place the
Bottom Backer
N to cover the back of
the bottom center compartment.
Use Screws ? to secure all edges of
the Backers as shown.
? Screw (2.5x10mm) x33
J
Q
N
K
L
R
J
U
V
6
T
6
With runner side facing out, attach the Left
Drawer Side T to the Drawer Back V using
2 Screws 6 . Ensure that the narrow
groove at the bottom runs continuously
along the inside of both pieces.
Repeat to a ttach the Right Drawer Side
U
to the Drawer Back .
15
Hardware Required:
6
Screw (4x35mm) x4
1
1
S
16
Hardware Required:
Hardware Required: