Contact us for assistance: (866) 985-7877 | www.wtliving.com
4
TABLE ASSEMBLY
1
Lay the
Table Top
A
upside down on a
nonabrasive
, level
Hardware Used:
J
8x30mm Stud x3
2
Fit the
3
Legs
B
over the
Studs
J
and secure in
position using
3
Washers/Spring
Washers/Nuts
H
(In that order).
DO NOT OVERTIGHTEN.
Hardware Used:
H
8mm Washer/Spring Washer/Nut
x3
3
Turn the assembled
Table Top/Legs
over.
Position the round
Leg
Support
C
on top of the 3 leg brackets.
Attach the
Leg Support
to
the
Legs
B
using a
Bolt
G
through
of
the
6
holes on the
Leg Support
and
through the
holes on each
leg bracket. Place
Washer/Spring
Washer/Nut
I
(in that order)
over the end of each
Bolt
. DO NOT
OVERTIGHTEN.
Hardware Used:
G
6x35mm Bolt
x6
I
6mm Washer/Spring Washer/Nut
x6
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at [email protected].
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 30 Minutes | DO NOT over tighten hardware!
J
J
J
A
B
H
A
G
A
B
C
I
1
2
3
surface. Affix 3
Studs
J
i
nto the
underside of the
Table Top.
ASSEMBLY
