IMPORTANT SAFETY INFORMATION
t
The installation must comform with local codes or, in the absence of local codes, with
the CAN/CGA-B 149.2, Propane Installation Code.
t
Always place the appliance on a firm and level surface.
t
Do not burn solid fuels in this gas appliance.
t
Use the appliance outdoors in a well-ventilated space only, not in a building, garage, or any other
enclosed area.
t
When using the appliance, keep the appliance area clear and at least 50 inches from combustible
materials, gasoline and other flammable liquid and vapors. Certain items or materials, when stored
under the appliance or nearby, will be subjected to radiant heat and could be seriously damaged.
t
Inspect the gas connections of appliance prior to each use. Do not operate the unit if there is gas leak.
A qualified service person should inspect the appliance annually.
t
Alert children and adults to the hazards of high surface temperatures and keep them away
to avoid burns or clothing ignition.
t
Carefully supervise children and pets when they are near the appliance.
t
Replace and guard or other protective device removed for servicing.
t
Do not hang clothing or other flammable materials on or near the appliance.
t
Do not use the appliance if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas
control which has been under water.
t
t
Use only a cylinder supply system arranged for vapor withdrawal, and the cylinder must include a
t
The LP-gas supply cylinder to be used must be: Constructed and marked in accordance with the
Specifications for LP-gas cylinders of the U.S. Department of Transportation (DOT); or the Standard
for Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and Commission,
CAN/CSA-B339, as applicable;
The LP-gas supply cylinder to be used must be provided with a listed overfilling prevention device;
and provided with a cylinder connection device compatible with the connection for the appliance.
collar to protect the cylinder valve.
t
This appliance requires 20 lb (9 kg) LP gas supply cylinder.
t
The burner must be replaced prior to the appliance being put into operation if it is evident that the
burner is damaged. The replacement burner shall be that specified by the manufacturer.
t
Installation and repair should be done by a qualified service person. The appliance should
be inspected before use and at least annually by a qualified service person. More frequent
cleaning may be required as necessary. It is imperative that control compartment, burners,
and circulating air passageways of the appliance be kept clean.
WARNINGS AND CAUTIONS
3
