Baldwin Baldwin Concert Master Mark II, Руководство пользователя, Страница: 19 / 43

1. POWER - Like the touchless sensor on the
FCD this button turns the control unit ON or
sets it into STANDBY mode.
NOTE: Use the ON/OFF switch
on the power supply (under the piano) for
complete power down. Wait 20-30 seconds
before re-starting the whole system.
2. SERVICE - Access to Solenoid Controller Setup,
Touch Sensor Setup, Firmware Upgrade,
Remote Access
Note: Service functions should only be used by
a certified Pianoforce technician!
THE SERVICE FUNCTIONS
Press SERVICE
Available functions are: Upgrade Firmware
Remote Assistant
Solenoid Controller Setup
Upgrade Firmware
New features, improvements, or corrections can be added by operating system updates . Updates can
simply be made by connecting the Performer to the Internet. Power down the system completely by turn-
ing off the power supply under the piano. Wait about 45 seconds. Connect a high speed Ethernet cable to
the back of the CD controller (ETHERNET 10M/100M). Turn on the power supply. When the start up is
completed, and if a new operating system version is available for your piano, the message “Yes, New Update
Is Available ... Do you want to update?” will appear. If you want to upgrade, press the Yes button and follow
the instructions on the display.
If a high speed Internet connection is not available, ask Pianoforce or your dealer for the latest firmware
version on a CD. Updating with CD is very easy. Open the CD tray, insert the CD labeled Pianoforce
Performance Firmware Update Version X.XX. By default, Performance has CD Auto Play. If this function is not
disabled by the user after the tray is closed, the update will start automatically. Follow the instructions on
the display. DO NOT TURN OFF THE SYSTEM WHILE UPDATING THE OPERATING SYSTEM. When the update is
completed, remove and store the CD.
Remote Assistant
To access the Remote Assistant, a high speed Internet connection is necessary. Power down the player
system by turning off the power supply under the piano. Connect the Ethernet cable to the back of the CD
unit. Turn on the power and wait until the start up is completed. Press SERVICE, then select the Remote
Assistant function by pressing the or - buttons. Press YES and follow the directions on the display.
With the Remote Assistant you can connect to online service support. Your system can be tested, analyzed
and in some cases even repaired this way. Please contact the Pianoforce service department at 877-542-
8807 ext. 2 before connecting to the Remote Assistant.
PERFORMER FUNCTIONS
21