C2CN Network Card.cdr
Issue 4 ECR 3223 05/06/17
Wealden Industrial Estate
Jarvis Brook, Crowborough
East Sussex TN6 2JR
Tel 01892 664422
www.baldwinboxall.co.uk
B A L D W I N B O X L L
Fitting Instructions continued
8)
Fire Panel Connections (Optional)
For BVOCCA control:
On PC1352 set P15 to N/O and set P16 to +24V
Delayed Call Connections (Optional)
and BVOCCA Settings
For Volt Free Contacts:
On PC1352 set P15 to N/O or N/C and set P16 to PARK
Connect to DELAYED CALL OUTPUT terminals shown below
9)
Important
Commissioning
Instructions:
Immediately after
installing the C2CN
Card and
BEFORE
attempting
ANY
configuration:
1) Clear Device
Assignments.
2)
Set the correct
Network Address
using Front Panel
Controls.
3) Initiate the
“Device Detection”
Procedure.
Note: If the Network
Address is not set
during Installation
then Network
Comms may fail and
Faults may not be
reported correctly.
BVOCCA Module
Switched
+V
0V
SwV
0V
C2CN or
C2CFPE
Module
