BVRDTSM Touchscreen Microphone
Installation Instructions
BVRDTSM Touchscreen Microphone issue 1
21
In order to use a BVRDTSM microphone a user must be logged
in. This is achieved either by presenting a configured MFC card to
the NFC antenna (Item H in Figure 3.1 above) or by pressing the
“Login” button (Item C in Figure 3.1 above) and entering a Pin
Number.
A user will be logged out after a configured period of time for
security. It is possible to disable this log out timer in
Configuration Mode to make the microphone never log out.
3.2.2 Zone Selection
Before any other functions can be performed the user must select
the zones that are to be used.
The user selects the zone by pressing the corresponding Zone
Select button (item A in Figure 3.1 above). The selection status is
displayed in the Zone Status display (Item B in Figure 3.1 above).
Once zones are selected pressing the PTT button will initiate a
broadcast to the selected zones and the Zone Status display will
change to “Live” to show that the BVRDTSM is currently
broadcasting to that zone. If the Zone status display does not
change it indicates that a higher priority broadcast is currently
being made to that Zone.
Once zones are selected it is possible to perform other functions
such as VA Message, PA Message playback, Back Ground Music
routing, Volume Controls etc. by pressing the corresponding
Menu Bar button (item N in Figure 3.1above).
N
OTE
: If no zones are selected and the PTT button is pressed
by default an "All Call" broadcast will be made. It is possible
to disable this function in configuration mode.
N
OTE
: VA Message playback is only enabled in Emergency
Mode.