- 2 -
Issue 3
VIGIL
E
CLIPSE
5
(BVECASE5)
The VIGIL Eclipse5 is a wall mountable, public address and / or voice evacuation system.
The unit houses the required number of input and output modules, one BVMBC battery charger,
Network Interface modules (if required), suitable batteries and a choice of up to four amplifier
mainframes.
If more than two amplifier mainframes are installed then an external Battery Box (BVECASE5BATT) is
supplied that is designed to be floor mounted, with the BVECASE5 installed directly above it.
P
RECAUTIONS AND
S
AFETY
I
NFORMATION
Environmental Conditions
AC Supply Voltage
230V - 15% +10% RMS 50Hz AC
DC Supply Voltage
18V to 33V (Nominal 24V) DC
Temperature (Operating & Storage) Nominal 25°C, transitory -5°C to +40°C
Humidity Range / IP Rating
0% - 90% Non-Condensing / IP30
This equipment must not be installed in an area that is subject to a corrosive atmosphere, excessive
moisture or may allow water or other liquids to come into contact with the unit or its external
connections.
In the close proximity of some radio frequency transmitting devices, the signal to noise ratio of this
product may be reduced. If this occurs, re-location of the equipment or the signal cables is
recommended.
C
A U T I O N
This product must only be disposed of in accordance with the
WEEE directive.
W
A R N I N G
The BVECASE5BATT is designed to be floor mounted as the
maximum weight of the BVECASE5BATT can be up to 100Kg.
!
W
A R N I N G
Ensure the wall or structure that this product is going to be
attached to is strong enough to support the weight of the unit.
The maximum weight of the BVECASE5 (without an external
battery box) can be up to 60Kg.
!
