7
2.2 WWVB Signal Receiving
1. After RF signal receiving, it will start searching radio signal for
7 minutes with the antenna symbol“ ”flashing on screen.
2. Once signal received, the main unit will display the received
time/month/date/weekday with symbol“ ”displaying on
screen.
3. Daily RCC signal receiving: there are regular radio signal
receiving at UTC 7:00,8:00,9:00,10:00,11:00 each day. It starts
receiving signal at UTC 7:00 everyday. For each day, once signal
received at any one receiving time, it will stop receiving signal
that day.
4.
Manual receiving: press and hold“ ▼/RCC ” button to enter
RCC signal receiving.
5. During receiving, no response if press other buttons, you can
press“ ▼/RCC ” button to exit RCC receiving.
(1) Make sure the RCC function is ON or you can set it by
2.3 Manual Settings → Settings Menu Orders → refers to point 2.
1.Make sure the main unit and sensor are in the same channel for
synchronizing data.
2.The main unit channel setting order is CH1--CH2--CH3--Circular
Channels Mode “ ”(from CH1 to CH2 to CH3, 5 seconds intervals).
3.If the signal receiving time exceeds 3 minutes, you need to press
and hold the “▲/ CH ” button to reconnect sensor.
Notes:
*RCC symbol display:
a. When receiving signal , RCC symbol“ ”will be flashing by“1HZ”.
b. When signal successfully received, LCD will display complete RCC
symbol “ ” and exit RCC receiving.
c. If no signal is received, the RCC symbol will disappear.
Notes:
