Baldor DG Series, Руководство оператора

Страница: 20 / 40

CONTROL PANEL
For DG5E and DG6E Units
A = THE START SWITCH. Pushing this button engages the starter motor.
B = THE RUN SWITCH . When this switch is in the 'ON' position the engine will start
and run once the start switch is engaged. When this switch is turned "OFF' the engine
will shut down. This switch should remain in the 'OFF' position unless the unit is to be
started and run.
C = ELAPSED TIME METER. This meter keeps and displays a continuous running total of
the hours accumulated on the unit.
D = VOLTMETER . This Voltmeter displays the voltage level being produced by the
generator set.
E = AC CIRCUIT BREAKERS. These circuit breakers provide overload protection for the
generator set. When tripped, the circuit breaker plungers will extend approximately 3/8".
F = NEMA L530R RECEPTACLE. This is a twist lock style receptacle rated for 125 VAC,
30 Amps.
G = NEMA 515R GFCI DUPLEX RECEPTACLE . This is a ground fault circuit interrupter
duplex rated at 125 VAC, 20 Amps. This receptacle must be tested on a regular basis
(monthly).
H = NEMA L14-30R RECEPTACLE. This is a twist lock style receptacle rated for 120/240
VAC, depending on how the mating plug is wired. It is capable of carrying 30 amps.
- 13 -