Balcrank PGE-55, Руководство по эксплуатации, установке, обслуживанию и ремонту

Страница: 6 / 8

6
Control Valve Service Kit
(Order 900013)
!
Meter Reassembly
A) Clean and inspect all parts. Replace any
suspect, worn, or damaged components.
B) Replace rotors (13).
NOTE: Ensure the rotor with the magnets is
assembled with the magnets facing up and
positioned on the correct side of the meter. Both
rotors must also be positioned at 90 degrees
to each other.
C) Replace the handle body o-ring (14).
D) Carefully position the module housing (10)
on top of the handle body (15), replace and
tighten the four allen screws (17).
E) Test the control handle for correct
operation.
F) Replace the computer module (2).
G) Replace and tighten the three phillips head
screws (11) and calibration port screw (18).
H) Replace the two AA Alkaline batteries (9).
Use the directions on the label found inside
the battery housing for correct battery
orientation.
I) Replace battery cover assembly (6, 7, and
8) and tighten the screw (5).
J) Firmly tighten the swivel assembly (31)
K) Replace the boot (1).
L) Test the control handle for correct
operation.
PGE-55 Parts List
* To be used with flexible hose
outlet when used as pistol style.
(see page 3) for control handles
prior to 5/03 only)
ITEM PART NO. QTY. IN KIT DESCRIPTION
1 830727 1 - Boot
2 831251 1 - Electronic Module
3 - - N/A
4 - - N/A
5 - 1 - Battery Cover Screw
6 - 1 - O-Ring
7 - 1 - Battery Cover
8 - 1 - O-Ring
9 - 2 - AA Alkaline Batteries
10 - 1 - Module Housing
11 - 3 - M 3x6 Taptite Screws
12 - 2 - Magnets
13 - 2 - Oval Gear Set
14 - 1 - O-Ring
15 - 1 - Control Handle Body
16 - 1 - Valve Cam
17 - 4 - M 6x20 Taptite Screws
18 - 1 - Calibration Screw
19 - 2 O-Ring
20 - 1 Washer**
21 - 1 - Latch Plate Assembly
22 - 1 - Latch Pivot Pin
23 - 1 - Spring
24 - 1 - Plunger
25 - 1 Seal
26 - 1 - Valve Body
27 - 1 Valve Spring
28 - 1 - Handle Sleeve
29 - 1 - Washer
30 1 O-Ring
31 830728 1 - Swivel, Control Handle
32 - 2 M4x6 C/Sunk Screws
34 - 1 - Lever Latching
35 - 1 - Button Spring
36 - 1 - Lever Plug
37 - 1 Mesh
38 - 1 O-Ring
39 - 1 - O-Ring*
** Prior to 7/03 (stamped on handle 0283)
use metal washer.
After 7/03 (stamped on handle 0293)
use plastic washer.
Outlet
Extensions
Model
Number
Nozzle / Tip
Extensions
Before 5/03
3/8” NPT
After 5/03
3/8” NPS
Rigid 3330-054 3332-086 829648
831471 plus
sealing nut
831470
Flex 3330-055 3332-086 829973 831469*
Flex 90
0
3330-057 3332-086 830276 831429*
Straight 3330-059 3332-086
81334 plus
jam nut
831333
831472 plus
sealing nut
831470
* 806895 (-112) o-ring included with extension.