bba
TM
3
USER GUIDE 42384 - Rev A
Balboa Water Group | Your Single Source Solution
6
5
spaTouch
TM
3
PAIR SMART DEVICE
Follow these steps to pair your smart device with the
bba
TM
3 amplifier (E).
1 - Power up the spa.
IMPORTANT: All paired devices are erased from
the bba
TM
3 amplifier when power to the spa is
cycled. While the bba
TM
3 amplifier forgets your
smart device when the spa power is cycled, your
smart device might not forget the bba
TM
3 amplifier.
In this case, an error message may appear if you
try to reconnect. You may need to have your smart
device “forget” the bba
TM
3 amplifier, and only after
that connect to the bba
TM
3 amplifier again to avoid
such error messages.
2 - Press the music button (A) to enter the Bluetooth
screen. The music button (A) may not appear if control
system (F) did not detect the bba
TM
3 amplifier (E).
3 - Press the power button (C) to turn On the
bba
TM
3 amplifier. This message will appear (B) when
your smart device is not connected/paired with the
bba
TM
3 amplifier. “BT” stands for Bluetooth.
4 - On your smart device, turn On the
Bluetooth function.
5 - On your smart device, click search for Bluetooth
device. Make sure the smart device is close enough to
the spa tub, so the smart device can pair with the
bba
TM
3 amplifier.
6 - On your smart device, select “BBA Spa Music” from
the pairing list. If “BBA Spa Music” does not appear,
repeat steps 1 - 5.
7 - Some smart devices will connect automatically,
but with others you will need to select “Connect.”
Once connected, a white ring appears around the
Bluetooth button and “BT Connected” appears at the
top of the screen (D). Play music on your smart device.
If the music plays from the speakers in the spa, the
connection is complete.
C
A
B
bba
TM
3 Amplifier
Control System
E
F
spaTouch
TM
3
ADJUST AUDIO SETTINGS
Follow these steps to adjust the audio settings.
1 - Navigate to the Bluetooth screen (A);
refer to page 4.
2 - Press the Settings button (B) to enter the
Settings screen.
3 - Make desired changes to the audio settings.
There are two types of filters (C): Low Pass and High
Pass. These filters apply to the rear speaker output
only. Select Low Pass for subwoofers or High Pass for
tweeters. Select OFF if filtering is not desired. Regular
speakers do not require filtering.
B
A
D
C
NOTE: bba
TM
3 operates up to 100
feet in open air. Ranges vary as
they are dependent on installations
and environments.
