Balboa Instruments Dolphin, Руководство пользователя, Страница: 10 / 19

19 18
4. Aim the Dolphin at your DVD Player and press
POWER once. The DVD Player should turn off.
If it does not respond, repeat steps 2-4, trying
each code for your brand until you find one
that works. If it still does not work, try
searching for the code (see Searching For Your
Code on page 25).
5. Write your DVD code in the boxes below for
future reference.
■ ■ ■ ■ ■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your DVD Player, press DVD first.
Setup Codes for DVD Players:
Aiwa 0641
Apex 0672
Denon 0490, 0634
Fisher 0670
GE 0522
Gradiente 0651
Harman/Kardon 0582
Hitachi 0573, 0664
Hiteker 0672
JVC 0558, 0623
Kenwood 0534, 0682
Konka 0711, 0719, 0720, 0721
Magnavox 0503
Magnavox 0675
Marantz 0539
Mitsubishi 0521
Onkyo 0503, 0627
Optimus 0571
Oritron 0651
Panasonic 0490, 0677, 0632
Philips 0503, 0539
Pioneer 0525, 0571, 0632
Proscan 0522
RCA 0522, 0571
Samsung 0573
Sony 0533
Technics 0490
Techwood 0692
Theta Digital 0571
Toshiba 0503
Yamaha 0490, 0545
Zenith 0503, 0591
Setup Codes for
Satellite Receivers:
AlphaStar 0772
Echostar 0775, 1005
Expressvu 0775
GE 0566
General Instrument 0869
HTS 0775
Hitachi 0819
Hughes Network Systems 0749
JVC
0775
Magnavox 0724, 0722
Memorex 0724
Mitsubishi 0749
Next Level 0869
Panasonic 0701
Philips 0749, 0724, 0722, 1076
Proscan 0392
RCA 0566, 0143, 0855, 0392
Radio Shack 0869
Samsung 1109
Sony 0639
Star Choice 0869
Toshiba 0749, 0790
Uniden 0724, 0722
Zenith 0856
PROGRAMMING DVD
CONTROL
Locate the brand name of your DVD player in the
Setup Codes For DVD Players section below, and
write it in the following space.
DVD Player Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your DVD Player:
1. Turn on the DVD Player.
2. On the Dolphin, press DVD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your DVD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.