c
@
c
c
c
ø
@
c
è*
*
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
*
è*
è*
è*
è*
è*
c
ø
@
c
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
*
ä
a
a
a
Take all accessory parts out
d
Do not operate the dryer if there
9
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensation container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
10 / 16 A
Product number
a
Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. Deviations of up to 10 % are possible. The value
on the label is achieved at the maximum heat setting.
Spin speed in rpm
(residual moisture)
Drying time** in
minutes, includ-
ing 8 minutes
cool cycle
Energy
consumption**
in kWh
resistentes/algod.
(Cottons)
7 kg
10 A
16 A
10 A
16 A
seco armario
(Cupboard Dry)*
1400 (aprox. 50%)
98
90
3.32
3.32
1000 (aprox. 60%)
117
106
3.92
3.92
800
(aprox. 70%)
138
120
4.48
4.48
]
seco + (Iron Dry) *
1400 (aprox. 50%)
76
66
2.45
2.45
1000 (aprox. 60%)
91
82
2.94
2.94
800
(aprox. 70%)
106
96
3.43
3.43
sintéticos (Easy-Care)
c
3.5 kg
seco armario
(Cupboard Dry)*
800
(aprox. 40%)
42
40
1.16
1.16
600
(aprox. 50%)
53
45
1.45
1.45
*Test program to DIN EN 61121.
**The values may deviate from the values shown here, because of over/undervoltage, type of
fabric, composition of the laundry to be dried, residual moisture in the material and size of the
load.
Optional accessories
(order from the after-sales service using the order number)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set
must
always be used to secure the dryer to the washing
machine. If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
Platform
For easier loading and unloading. The basket in the pull-out can be used for carrying the
laundry.
Installation underneath the worktop
Risk of electric shock.
Instead of the appliance covering plate, you
must
have a metal cover fitted by an expert.
WZ
20311
WZ
20460
WZ
20295
10
What to do if ...
Repairs must only be carried out by the after
ä
sales service or an authorised expert.
Before you contact the after-sales service, please make sure that you are unable to resolve
the problem yourself. You will be charged for advice if a technician is called out, even during
the warranty period. You can find your nearest after-sales service in the enclosed list. When
contacting the after-sales service, please quote the appliance's product number (E-Nr.) and
production number (FD) (
a
on the inside of the door).
ʠ
The
$
inicio/stop
(start/stop)
indicator light does not come on.
Mains plug plugged in?
Programme selected?
ʠ
The
depósito (container)
limp.
r
/
l
(clean)
indicator light
comes on.
Empty the condensation container
a
page 4
.
ʠ
The
depósito (container)
limp.
r
/
l
(clean)
indicator light
is flashing.
Clean the fluff filter
a
page 4.
Clean the air cooler if necessary
a
page 6.
ʠ
Dryer does not start.
Has the
$
inicio/stop
(start/stop) button been pressed?
Door closed?
Programme set?
ʠ
Programme stops shortly after it
has started.
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter
a
page 4.
Empty the condensation container.
Ambient temperature higher than 35 °C
a
airing.
Air inlet may be blocked
a
keep unobstructed.
Was an unsuitable programme selected?
a
page 7.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure
a
Restart the dryer.
Thin layer of limescale on the moisture sensors. Clean the
moisture sensors
a
page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timer
programme as a supplement
a
page 7.
Warm laundry feels damper than it really is!
ʠ
The humidity in the room
has increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
keep unobstructed.
Ensure that the air cooler is in use.
ʠ
One or more indicator lights is/are
flashing.
Clean the air fluff filter and air cooler if necessary
a
page 4/6
.
Check the installation conditions
a
page 8.
Switch off, allow to cool, switch on again and restart the
programme.
ʠ
Mains failure.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate.
ʠ
If you cannot rectify a fault yourself or a repair is necessary:
– Set the programme selector to
stop
(Off).
– Remove the appliance plug from the socket.
– Call the after-sales service
a
after-sales service directory.
a
a
a
a
a
a
a
a
a
