13
DISPLAY Brightness Function
Changing the Display Brightness: The REX display can be dimmed or turned completely
OFF by simply pressing the DISPLAY button on your VK-R3 remote control transmitter.
Each press will reduce the brightness of display and LED indicators in steps from full ON to
OFF, and then one press back to full ON. The LED indicators will dim but never turn
completely OFF. With the display OFF, issuing any remote control command that would
normally require a display change (i.e.: Volume, Input selection, Fade) will automatically turn
the display back ON.
MUTE Function:
The REX has two mute modes: manual and automatic. The blue LED above the Mute button goes
ON when the unit is in MUTE state. To MUTE the REX, depress the MUTE button located on the
right side of the front panel. Depressing this button again will return the unit to its normal operation
and turn the mute LED off.
When the unit is powered up it automatically self-mutes until the proper operating points of the
circuitry are reached. It will then automatically go into Play mode, provided the Mute function was
not activated (the blue Mute LED is Off).
Turning the REX OFF even for short time, will make the unit reset its power sequencing circuit and
mute its output. It will then require 50 seconds for the unit to become operational again.
