move the set from place to place without re-setting the clock every time. The
battery back-up system is only meant to be used from short temporary power
failures. For longer durations the battery may become exhausted or there may be
some deviation in accuracy. When the battery is exhausted, it should be removed
from the set to prevent leakage. If you do not wish to take advantage of the
battery back-up system, your set will work normally without a battery. However, if
disconnected from the mains, the clock figures will flash when the mains are
re-connected and you must re-set the clock as described in the Electronic Clock
Operation paragraph.
CLOCK SETTING
1. To set hour, press and hold the Time Set button (3), press the Hour button (9)
until the desire hour is displayed.
2. To set minute, press and hold the Time Set button (3), press the Minute button
(10) until the desire minute is displayed.
RADIO OPERATION
1. Slide the Function selector (ON/OFF/AUTO/BUZZ)(11) to “ON” position.
2. Slide Band Selector (14) to FM or AM position.
3. Turn the Volume Control (15) to desired volume level.
4. Turn the Tuning Control (16) to select your favorite radio station.
5. Antenna
For AM reception, this radio incorporates a highly sensitive ferrite core bar
antenna.
For FM reception, this set is specially equipped with an external wire as FM
antenna wire (20). Be sure to untwist it to its fullest length for peak
performance.
NATURAL SOUND OPERATION
1. To switch the natural sound on, slide the Function selector (11) to “ON” position.
2. Slide the Natural Sound / Radio function selector (18) to “NATURAL SOUND”
position.
3. Slide the Natural Sound Mode Selector (17) to select desire natural sound mode.
Natural sound Mode : 1=Rainforest ; 2=Seashore ; 3=Babbling Brook ; 4=Country
Night
4. Adjust the Volumn control (15) to the desire volumn level.
WELLNESS-LIGHT OPERATION
1. To turn on the light, slide the Light (4) button to “ON” position.
