USING THE AC ADAPTOR
The lighting of the Clock is powered by AC through the supplied switching power AC
adaptor.
Connect one end of the AC adaptor to DC IN on the Clock and plug in the other end.
SETTING THE TIME
1.
Turn on the power by pressing button.
2.
Project the clock on a white wall or ceiling.
3.
Make the projector image clear by pulling the lens forwards and backwards.
4.
Open the back cover, like the step 1 of “installing/Replacing the battery”.
5.
Set the correct time by turning the time setting.
CHANGING THE COLOR FILTERS
1.
Remove the LENS cap by tuning the arrows on the LENS cap to point to the arrow
on the LENS TUBE, the pull it straightforward (see below).
2.
Place a COLOR FILTER inside the LENS TUBE, putting the 2 tabs on the COLOR
FILTER into the slots on the LENS TUBE rim (see below).
3.
Put LENS over the COLOR FILTER, then do the converse process of step 1.
Содержание 396255
Страница 4: ......
