Press “ TX “ button (D7) on the thermo sensor unit to transmit temperature to the main unit
manually. The main unit gives a “beep” sound if it received the temperature.
Display Outdoor Temperature :
Press “ CHANNEL” button (B3) to view the 3 Channels’ temperature. The sequence is shown
as follow:
Press
Press
Press
“CHANNEL” button
“CHANNEL” button “CHANNEL” button
Display the three
channels alternatively
Hold “ CHANNEL” (B3) button for 3 seconds to cancel unused channel. It will automatically
register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel ( “
- - . –“
is displayed on the LCD ),
hold “CHANNEL” button (B3) for 3 seconds to cancel that channel and receive the channel
again (“Beep” sound can be heard.) Then, press “ TX “ button (D7) on the thermo sensor unit
to transmit signal to the main unit manually
The trend pointer displayed (A17) indicates the trend of the outdoor temperature.
“
” indicates the outdoor temperature is increasing.
“
” indicates the outdoor temperature is steady.
“
” indicates the outdoor temperature is decreasing
Press “ °C /°F” button (D6), on the Thermo Sensor unit, to select Temperature to be displayed
in Celsius mode or Fahrenheit mode.
The use of 1.5m cord Temperature Probe:
Insert the probe plug (D9) on the right hand side of the Thermo Sensor Unit.
Put the metal casing outside and leave the Thermo Sensor Unit in an indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.
Always use the temperature probe to sense the temperature when the temperature is between
the following range:
-50 °C ~ 0°C and +50°C ~ + 70°C
Radio Controlled Clock: