10
Cleaning and Maintenance
Oven Cavity
With the door open, the rack and jet plate(s) removed, wipe out inside of the oven with a clean, damp cloth. Use a
nylon scouring pad dampened with approved cleaning chemical or stiff nylon brush to remove any baked on debris.
Use a clean towel dampened with clean water to thoroughly wipe out inside to remove any cleaner residue and food
particles.
Do not use steel wool.
Keep cleaning fluids away from electrical wires, light sockets, switches, and the control panel.
Oven Exterior
To remove common dirt or product residue from stainless steel, use ordinary soap and water (with or without
detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never use vinegar or corrosive cleaner.
Do not use chlorine based cleaners.
To remove grease and food splatter or condensed vapors that have baked on the equipment, apply cleaners to a
damp cloth or sponge and rub cleanser on the metal in the direction of the polished lines on the metal. Rubbing
cleanser as gently as possible in the direction of the polished lines will not mar the finish of the stainless steel. To
remove discoloration, use a non-abrasive cleaner. NEVER use a wire brush, steel or abrasive scouring pads, scraper,
file or other steel tools. NEVER RUB WITH A CIRCULAR MOTION.
Oven Maintenance
NOTE: This appliance must be serviced by a factory authorized service agent. Unauthorized service or
repairs may void the manufacturers warranty.
• Power supply to the unit must be disconnected before any service is performed.
• Most of the service on this unit can be performed from the top and/or right side.
• It will be necessary to have access to the back of the oven for service needs related to the electric power supply.
However, for proper servicing, access to all sides is recommended.
• A system wiring diagram is provided in the back of this document as well as attached to the inside of the right side
oven panel.
• All servicing should be performed by a factory-authorized technician only.
• For proper maintenance and repairs, call the factory toll free (800.431.2745) for an authorized service agency in
your area.
CAUTION: This product, when stacked, has more than one power-supply connection point. Disconnect all
power supplies before servicing.
