Page
42
of
55
Internal power socket
An internal power socket is provided within the workstation chamber. The socket is located on the
left hand side, underneath the rear shelf.
The maximum permissible power rating of equipment connected to the internal socket is shown in
Figure 25.
The internal power socket is controlled in the settings menu:
Figure 25: Internal socket power ratings
Supply voltage
Power rating
120V AC, 60Hz
1 Amp
240V AC, 50 Hz
1 Amp
Cable gland
The cable gland is used to allow cables to enter the workstation chamber without affecting the
internal environment of the workstation chamber. The cable gland is suitable for cables of
diameter 3.5mm to 7mm. The cable gland port is located on the left hand side and is shown below.
Figure 26: Cable gland
To use the cable gland;
•
Turn the grey collar anti-clockwise (counter-clockwise) to loosen the cable gland.
•
Remove the red plug.
•
Push the cable through the cable gland.
•
Tighten the grey collar by turning clockwise until tight. Do not over tighten the cable gland
Universal cable gland
The Universal cable gland is used to allow cables to enter the workstation chamber without
affecting the internal environment of the workstation chamber. The Universal cable gland provides
a diameter of 50mm for passing through larger cables and connectors. The Universal cable gland
is located on the left hand side of the workstation.
