Baker Hughes Panametrics HygroPro, Руководство пользователя

Страница: 17 / 30

Chapter 2: Operation
2.1 Powering up and programming
After the HygroPro has been installed as described in
chapter 1, installation , power may be applied to the unit.
The transmitter requires up to 60 seconds to initialize and
begin normal operation. The unit will meet its specified
accuracy within 3 minutes.
Figure 7 below shows a close-up view of the
HygroPro
display and keypad, and "Figure 8" on page 10 a
complete menu map of the HygroPro setup program.
Figure 7: HygroPro display and keypad
9