Baker Hughes Masoneilan SVIII AP, Руководство по установке и обслуживанию

Страница: 64 / 204

© 2017 Baker Hughes, a GE company, LLC. All rights reserved.
64
|
BHGE
Checking the Electronic Module Connections
WARNING
Do not remove the instrument cover or connect to an electrical
circuit in a Hazardous Area unless power is disconnected.
The SVI II AP terminal board has terminal blocks with cage clamp connectors. Not all options
are available for every model. Refer to Table 8 for available functionality.
1. Confirm the correctness of all applicable connections to the electronics module.
Figure 32 Connections to Electronics Module (via Terminal Board)
NOTE
When an SVI II AP is turned on, apply the air supply before
applying the electrical input signal.
Table 8 SVI II AP Models and Functionality
Available Functionality Positioner Model Number
SVI II AP-2 SVI II AP-3
4 - 20 mA Input Setpoint
 
Display/ Pushbuttons Optional Optional
Remote Mount Input
 
SW #1 and #2 Optional Optional
4 - 20 mA Out Position Transmit Optional Optional
Display
Remote
Process Variable
Position Retransmit
I/P Connector
Position
Sensor
Configuration Lock
Jumper
4- 20 mA
Input Signal
SW #1
SW #2
Input
D/I
(not used)
(enabled using
SMARTs Assistant)