FS-9100OM
– REV B
iv
Copyright 2020 Baker Hughes Holdings LLC. All rights reserved
WARNING
Certifications are based on the use of approved cables only. Currently available approved cables are Reuter-Stokes
RS-E2-0285PXXX and GE 362A1053PXXX.
Do not attempt to disassemble the sensor. Sensor is not repairable. Breaching the seal of the sensor will cause
loss of the inert fill gas and render the sensor unusable.
Do not remove the sensor by wrenching on the body. Always use the 1 5/8 inch mounting nut. Wrenching on the
body may breach the seal. Breaching the seal of the sensor will cause loss of the inert fill gas and render the sensor
unusable. Once the seal has been broken it cannot be resealed by reassembly.
Do not install a sensor that has a cracked window, damaged threads, or one that has been disassembled.
CAUTION
The operating temperature range of the Flame Tracker Lite is
-40°C to 120°C
.
Do not
attempt to touch the Flame
Tracker Lite until it has reached a safe handling temperature.
