Baker Hughes Druck 8000 Series, Инструкция по эксплуатации

Страница: 14 / 44

Copyright 2010 Baker Hughes Company.
6 | TERPS Instruction Manual–English
3.3.1 Media Compatibility
The media compatibility of the sensors is shown in Table 1.
Note: Fluid classification complies with European Regulation (EC) No 1272/2008. Statements
comply with European Pressure Equipment Directive 2014/68/EU.
3.3.2 Pressure Containment
The pressure containment of the sensors is shown in Table 2.
3.4 Power Requirements
The sensor should be connected to a stable power supply. The power supply requirements are
shown in Table 3.
3.5 Software
3.5.1 USB Driver
Drivers for the USB sensor are available from FTDI and should auto-install in any Windows® or
Android™ operating system. The USB driver is available to download from the FTDI website:
http://www.ftdichip.com/FTDrivers.htm
Table 1: Media Compatibility
Product Pressure Range Media Compatibility
81XX 0 to 3.5 bar
0 to 50 psi
Non-condensing dry gases compatible with silicon
dioxide, fluorosilicone RV adhesive, stainless steel
316L and glass.
80XX 0 to 70 bar
0 to 1000 psi
Fluids compatible with stainless steel 316L and
Hastelloy C276.
82XX
83XX
0 to 70 bar
0 to 1000 psi
Fluids compatible with Hastelloy C276.
Table 2: Pressure Containment
Product Pressure Range Pressure Containment
81XX 0 to 3.5 bar
0 to 50 psi
7 bar maximum
100 psi maximum
80XX
82XX
83XX
0 to 7 bar
0 to 100 psi
70 bar maximum
1000 psi maximum
>7 to 70 bar
>100 to 1000 psi
200 bar maximum
2900 psi maximum
Table 3: Power Supply Requirements
Product Supply Voltage (V dc) Supply Current
RPS Versions 6 to 28
3.5 mA nominal
20 mA peak
RS - 485 and RS - 232
Versions
11 to 28
16 mA nominal
32 mA peak
USB Version Supplied by USB host
40 mA nominal
100 mA peak