Baker Hughes Apollo 3, Руководство пользователя

Страница: 123 / 277

Copyright 2020 Baker Hughes Company. All rights reserved. Page 123 of 277
Table 29: Download Limits Common Installations (cont'd.)
Parameter Default Description
Leakage High Not In Use The Leakage High trigger is
a Stop->Fault trigger used to
protect the motor. Select Leakage
High to set the limit. Set the Trip
Delay and Restart parameters as
desired.
DH Data Invalid DH Data Invalid is a Log Only
trigger used to monitor the validity
of the downhole data. Select DH
Data Invalid to access its Trigger
Info screen. If you wish to shut
down the drive if the downhole
data is invalid, change the Action
to Stop->Fault. After saving the
trigger as Stop->Fault, the restart
parameters will appear and
allow restarts to be configured, if
desired.
Navigate between pages of the menu by pressing the Left Arrow and Right Arrow buttons. The second page
of menu is shown in
Figure 90: Downhole Limits Menu, page 119 .
Figure 95: Download Limits-Screen 2