General Maintenance
NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY AFTER UNIT HAS BEEN
DISCONNECTED FROM ELECTRICAL POWER AND GROUNDING.
•
Never use a metal or stiff brush to clean the mixer. Never clean the mixer with a
water hose or any fluid pressure.
•
The mixer should be thoroughly cleaned daily.
•
Bowls and agitators should be removed from the mixer and cleaned in a link.
•
The transmission case and planetary mechanism should be inspected weekly for
leaks, damage, etc. Should it become necessary to repack the ball bearings, an
authorized service technician or the manufacturer should be contacted. Use of
unproved grease of lubricants may lead to damage and void the unit’s warranty.
•
The bowl lift slidways (Figure 1-1) should be lubricated semi-annually, or more often
under heavy usage. Disconnect the unit from the power supply before removing the
top housing or apron. The drip cup (Figure 1-4) or safety guard should be inspected
periodically for moisture or lubricant dripping. Remove the cup and wipe it with a soft
cloth.
Cleaning
•
The mixer should be thoroughly cleaned daily.
•
Bowls and agitators should be removed from the mixer and cleaned in a sink.
•
DO NOT use a hose to clean the mixer - it should be washed with a clean damp
cloth.
•
The drip cup (Figure 1-4) should be removed periodically and wiped clean. A large
flat blade screwdriver may be used to remove the drip cup
