BAK LarOn H, Руководство по эксплуатации

Страница: 3 / 14

BAK Thermoplastic Welding Technology AG 3
INTENDED USE
The LarOn H is an automatic welding machine for overlap welding of roofing membranes
made of PE, PVC, TPO, ECB, EPDM, CSPE and bitumen. The machine can also be used in
areas close to edges and on uneven surfaces.
Any improper use may result in danger for the operator or third parties or may adversely
affect machines and assets.
Only use the automatic welding machine if in technically perfect condition and for the
purposes for which they are intended while observing the operating instructions.
The tool can be used for the applications mentioned in the present operating instructions only!
Stop operating the automatic welding machine if:

connecting line or plug have been damaged.

safety installations have been damaged.

changes occur in the operating state.
EXTENSION CORDS
When using extension cords the minimum diameter of cables must be observed.
Extension cords must be approved and marked for their place of utilisation.
Before operating the machine examine the tool adjustment.
Proceed with adjustments only in cold condition (danger of burns).
NOZZLE ADJUSTMENT
Changes of the nozzle adjustments can be done if screws are loosened
For recommended settings use the following sketch:
2,
5
42 -45