4
BAK Thermoplastic Welding Technology AG
Welding
thermoplastic materials as well as modified
bitumen.
Igniting
of wood shavings, paper, coal or straw in furnaces.
DEVICE DESCRIPTION
1 Power supply cord
5
Air filter
2 Main switch
6
Rubber stand
3 Potentiometer for temperature adjustment
7
Heater tube
4 Handle
OPERATING CONDITION
If it is not possible to start the motor, a reset is needed.
o
Reset: Turn off main switch – wait for 3 seconds –
Turn on main switch
Maintain the maximal allowed impedance
Zmax. =0.301+j0.188 and if necessary consult the power
supply company.
As required, push-fit appropriate nozzle or reflector.
Connect the tool to the mains.
Adjust the hot air temperature by the potentiometer (3),
Switch on (2) and let the tool heat up for about 5 minutes.