BAK Thermoplastic Welding Technology AG
2
WARRANTY AND LIABILTY
Warranty and liability apply from the date of purchase (documented by the in-
voice/delivery note) according to the currently valid general terms of business
from BAK. BAK refuses to honour any warranty for devices which are not in
their original condition. BAK devices may never be reconfigured and/or modified.
BAK reserves the right to deny any responsibility if this is ignored. No liability
can be assumed by BAK for incorrect installation and/or use as well as natural
wear and tear of components (e.g. heating elements).
Note:
This operating manual must be available to the installation and operating person-
nel at all times. Read these operating instructions carefully before installing and
using the device.
Copyright:
This document must not be disclosed to third parties without the explicit written
approval of BAK. Any forms of reproduction or copying and electronic storage
are prohibited.
CONVENTIONAL APPLICATION
This BAK hot air heater is a modular unit which creates process heat in industrial
environments. The device is suitable for continuous operation. The blower can be
used as hand tool, bench tool or can be built into machines and installations.
Their installation and the working process shall only occur after observance of
every safety arrangement for the provided place of installation and application.
The accordance with the effective edition of the equipment and operations safety
(GPSG) and the machine standards (MRL) must be guaranteed.
