BAK Thermoplastic Welding Technology AG
2
SAFETY
Danger to life
Unplug the tool before opening it as live components and connections are exposed.
Danger of fire and explosion
in case of incorrect use of the automatic welding
machine, especially near combustible materials and/or explosive gases.
Danger of burns
Allow the tool to cool down.
Connect the tool to a socket outlet with protective earth conductor. Any interruption
of the protective earth conductor within or outside the tool is dangerous! Use only
extension cables with a protective earth conductor.
The
voltage rating
stated on the tool should correspond to the mains voltage.
For personal protection, we strongly recommend to connect the tool to a
RCCB
(R
esidual
C
urrent
C
ircuit
B
reaker
)
before using it on construction sites.
Do not leave the tool unobserved.
The tool must not be used by children or people
with limited physically, sensory or mental ability. Children must be supervised to
prevent that they play with the tool.
Protect the device from damp and wet!
WARRANTY AND LIABILTY
Warranty and liability apply from the date of purchase (documented by the invoice/delivery
note) according to the currently valid general terms of business from BAK. BAK refuses to
honour any warranty for devices which are not in their original condition. BAK devices may
never be reconfigured and/or modified.
BAK reserves the right to deny any responsibility if this is ignored. No liability can be as-
sumed by BAK for incorrect installation and/or use as well as natural wear and tear of com-
ponents (e.g. heating elements).
Note:
This operating manual must be available to the installation and operating personnel at all
times. Read those operating instructions carefully before installing and using the device.
Copyright:
This document must not be disclosed to third parties without the explicit written approval of
BAK. Any forms of reproduction or copying and electronic storage are prohibited.
