BAK Thermoplastic Welding Technology AG
5
PRESSURE ADJUSTMENT
Engage and position the welding tool onto the material to be welded. Pull the toggle lever (13)
.
By rotating the adjustment screw (7) the drive/pressure rollers will lightly touch the material to
be welded, in this way you will define the
POINT ZERO(3) N
of pressure. Set the desired
pressure by rotating the adjustment screw (3), to every single step of rotation you will set 100N
of pressure on seam. Lock the desired pressure with the locking screw (12)
.
Warning:
If the maximum welding pressure (1000 N) is exceeded, mechanical damage may
occur.
If you turn the adjusment screw (3) clockwise, you change the pressure 100N per one third turn.
0
100
200
300
400
500
600
700
800
900
1000
1100
1
2
3
4
5
6
7
8
9
10
WARNING NOTICE
If you are not using the machine for a longer period of time, switch of the heat. Otherwise, some
parts can be heated up to more than 70°C.
Never cool down the wedge with water, cooling spray, etc.
ASSISTANCE AND SUPPORT
The BAK group and its authorised service centres offer free support and assistance in the area of
applications technology.
Our specialists will be pleased to help you.
Customer service and orders:
BAK Thermoplastic Welding Technology AG
Industriestrasse 6
CH-6064 Kerns/Switzerland
Telefon: (0041) 041 661 22 50
Telefax: (0041) 041 661 22 51
E-Mail: [email protected]
ACCESSORIES
Get the best results by using BAK-accessories and spare parts.
Further information can be found in our brochures.
3
12
1/3-Umdrehung
N
7
