Bajaj Pulsar RS200 BS VI, Руководство по установке

Страница: 6 / 17

BAJAJ
– Pulsar RS 200 BS VI, Dominar 400 BS VI & 250 BS VI
Parameter Key Points Important Guidelines for Customer Education
New Feature (For Dominar 400
BS VI Only)
Mobile charging socket provision near Ignition switch
• The charger socket has been provided with cap to protect charger socket from
dust & water entry. Always ensure charger cap is firmly closed on socket when
charger socket is not in use / washing of vehicle and in the event of rain.
• The charger socket can be used for charging mobile only in engine running condition.
• The charger socket will supply output voltage only in engine running condition.
• Customer to use suitable USB cable for mobile charging.
• Do not use mobile phone while driving . Momentary lapse in concentration might
result in an accident.
Carrier unit navigation (Mobile Holder mounting)
provision above speedometer
• Customer to purchase mobile holder from local market & fix it on the Carrier unit
navigation. Fit mobile in horizontal direction in mobile holder so that speedometer is
visible to rider.
• Max allowed payload 700 gm, holder)
• Ensure mobile is firmly secured in mobile holder.
NOTE : Bajaj Auto will not be responsible for any damages of mobile .
Extended grab handle with provision for Top case
assembly fitment
• Grab handle should not be used to lift the vehicle from back side, it may result in
damage to grab handle.
• The max allowed pay load on grab is 7 kg.(Top case inclusive). Do not exceed
allowable load limit as it may cause damage to grab handle.
• Customer to purchase top case assembly with base plate from local market
Recommendation GIVI E300 N2 Make.
• Before installation of top case assembly on Grab handle, back rest assembly needs
to be removed
• Ensure to assemble top case as forward as possible with respect to pillion seat.