How to Ride Your Bike
11
Proper running-in is important for the better life and
trouble free performance of the vehicle.
•
During first 2000 kms running-in period do not
exceed following speed limits.
Kms
1st
2nd
3rd
4th
5th
0 - 1000
15
30
45
55
65
1000 - 2000
20
40
55
65
75
•
Always keep the speed below the limits mentioned
in the table.
•
Do not race the engine excessively.
•
Do not start moving or race the engine immediately
after starting. Run the engine for a minute at idle
speed to give the oil a chance to workup into the
engine.
Running IN
Riding the Bike
Before starting the vehicle and with the ignition key off,
adhere to the following first thing in the morning or after
a long period of non-use (whichever is the case).
Depress the clutch lever completely. Kick the kick lever
all the way down to its stop, briskly a couple of times.
Release the clutch lever.
Starting the Engine :
•
Keep the fuel tap to ON or RES position.
•
Turn ignition switch to ON position.
•
Turn Kill switch to ( ) ON position.
•
Confirm that the vehicle (transmission) is in neutral.
•
If the engine is cold or when starting for first time.
Use choke for quick starting. Choke lever (A) is
located on LH side of Carburettor.
•
Keep the throttle completely closed, push the starter
button ( ) or kick the engine with kick starter lever.
•
When the engine is warmed up enough to idle
without using choke, return the choke to OFF
position.
A : Choke “OFF”
B : Choke “ON”
A
B
Downloaded from
www.Manualslib.com
manuals search engine
