Bajaj Dominar 250 BS VI, Руководство пользователя

Страница: 32 / 52

A
Periodic Maintenance Information
Spark Plug
• Remove spark plugs by using plug spanner.
• Clean the spark plugs at 10000 Kms..
• Adjust the gaps if incorrect by bending
outer electrode carefully.
Spark Plug Gap : 0.8 to 0.9 mm.
Spark Plug
(LH Side)
: CHAMPION (PRG6HCC)
(Center)
: CHAMPION (RER6YCA)
28
• Chain slackness will have to be adjusted
whenever required.
• Std. Chain slackness 20 ~ 30 mm.
• Marking on chain adjusters should be identically
positioned on both sides.
• Ensure application of 9 to11Kgf.m torque to
rear axle nut.
Drive Chain Slackness
Not shown in image
0.8 to
0.9 mm
• ‘O’ rings must always be kept
wet for best performance hence
lubricate every 500 Km.
• O-ring chain lubrication can
easily be done by owners using
Bajaj ‘Chain Lube Spray Can’
available with Bajaj dealers for
sale.
Drive Chain (O-ring type)
Drive chain must be cleaned &
lubricated as per periodic
maintenance schedule.
Drive Chain Cleaning
• Put vehicle on side stand & tilt the vehicle to make rear
wheel free. Clean the chain by using lint free cloth (If
excessive mud / slush found approach Bajaj dealer for
proper cleaning).
• Shake the can vigorously by holding vertically upright till
the noise of steel ball inside heard uniformly.
• Hold spray can at the back of rear sprocket with
extension tube nose at 5~10 cm.
• Rotate the wheel in reverse direction & spray the lube
on middle portion of the chain up to full length of the
chain.
Method of O-ring Chain Lubrication