3. Clock Reset :
• Digital clock indicates time in HR & MM separated
by colon ‘:’
• It is 12 hour clock.
• Initially ‘:’ will be blinking
• Clock setting is possible in TRIP 1 mode only.
1. Press mode push button
for less than 2 sec.
TRIP1 Mode selected
2. Press mode & set
push button together
for more than 2 sec.
Press mode button for
less than 1 sec.
Press set button for
less than 1 sec.
Press mode & set
button together for
more than 2 sec.
Clock set mode is
selected & no editing
is carried out for
more than 5 sec.
‘:’ stops blinking
Digits starts blinking
Hour digits will
increases by one.
Minutes digits will
increases. If mode/set
button is pressed
continuously then digits
will stop blinking.
Set value will be saved
Exit clock setting mode
Digits stop blinking
‘:’ start blinking
Auto exit without saving
set value.
If engine/vehicle rpm is
given then system will
exit from clock set mode
without saving set value.
3.
4.
5.
6.
Speedometer Setting
13
S
M
Set
Mode
Clock
TRIP 1/2
