Baja Outlaw 40 Скачать руководство пользователя

Страница: 69 / 90

40 Outlaw

7.5

eCtiOn

7 • O

ptiOnS

& a

CCeSSOrieS

c. v

acu

lush

eaD

pTion

)

The Vacuflush

head utilizes a hEaD sysTEM

breaker on the main distribution panel. The foot

pedal at the base of the toilet opens a mechanical

seal and vacuum forces waste through the opening

in the bowl to an accumulator tank, through the

vacuum pump and then to the holding tank or

treatment tank (see figure 7.5.1).

To Operate:

1. Turn On the WaTER PUMP breaker.
2. Turn On the hEaD sysTEM breaker.

REfER TO OWnER’s ManUal PaCkET fOR

InsTRUCTIOns anD WaRRanTy InfORMaTIOn.

D. h

olDinG

ank

peraTion

Waste from the head is directed into the holding tank

located in the engine room. The holding tank fluid

level indicator is located on the main distribution

panel or in the head which indicates 3/4 fUll,

fUll and DO nOT flUsh, or on some models

may read fUll, 1/2, or EMPTy. When the fUll

light is on, the DO nOT flUsh light will also be on.

When these lights are On, the holding tank must be

emptied before the head can be reused.

e. v

enT

ilTer

The vent filter is designed to control odors associated

with the head system operations. The vent filter

is located on the holding tank.

The filter must

be changed at the beginning of each boating

season to be effective.

The vent filter is installed

in-line on the holding tank ventilation hose.

Note

: Do not over fill the holding tank as this will

flood the vent filter and render it useless. Filter

replacement will then be required. see Parts

Manual for correct replacement filter.

10. e

xhausT

YsTeMs

your boat comes with a choice of different exhaust

systems. Below is a description of the standard and

optional systems on your 40 Outlaw.

Thru-Hub Exhaust (standard):

Thru-hub exhaust

propellers consist of a round barrel to which the

blades are attached. The exhaust passes through

the barrel and out the back, without making contact

with the blades. This provides a good clean

water flow to the blades, usually resulting in good

acceleration and hole shot.

Corsa™ Performance Quick & Quiet II (option):

a full time, non-switchable, thru-hull exhaust system

that uses patented silencer Tips with a pair of upper

exhaust splitters connected to the lower wishbone

and the exhaust riser.

Corsa™ Performance Quick & Quiet Plus

(option):

an electronically operated exhaust

diverter used in conjunction with the same silencer

Tips of the Quick & Quiet II system, but with the

added flexibility to switch the exhaust flow to fully

silenced, thru-prop operation. The switch is used to

change the exhaust exits, either thru-prop or thru-

hull, which will provide maximum performance or

minimum exhaust sound.

Many areas regulate noise limits. Even if there

are no laws, courtesy demands that boats operate

quietly.

ypiCal

aCu

luSh

with

Olding

anK

OCKSide

uMp

-O

& M

aCeratOr

. 7.5.1)

ThRU-hUll

VEnT

hEaD

hOlDIng Tank

MaCERaTOR

(OPTIOnal)

DOCksIDE

PUMP-OUT

hEaD

DIsChaRgE

sEaCOCk)

VEnT fIlTER

VaCU-gEnERaTOR

Содержание Outlaw 40



























































































Результаты поиска

Содержание Outlaw 40

Отзывы:

Похожие инструкции для Outlaw 40

Бренды по названию

Популярные бренды

Baja Outlaw 40, Руководство пользователя

Результаты поиска

Содержание Outlaw 40

Отзывы:

Похожие инструкции для Outlaw 40

Бренды по названию

Популярные бренды