Baja Islander 242 Скачать руководство пользователя страница 71

Страница: 71 / 83

8.8

242 Islander

eCtIon

8 • r

equIred

nspeCtIon

, s

ervICe

, &

aIntenanCe

8. q

uick

eference

hecklisT

as the owner/operator of a Baja

Boat, you are responsible for the safe operation of your boat and the

safety of your passengers. always be sure that required documents, navigational equipment and Coast

guard required safety equipment is aboard and in proper working order.

*note: If trailering boat, many of these items should be checked before leaving the house.

a. b

oarDinG

The

oaT

eneral

1. Weather Conditions ................................................ Is it going to be safe to go out

2. Transom Drain Plug ................................................ Installed

3. PfDs and all other Coast guard

required safety equipment ...................................... available for all children and adults

4. Ignition keys ............................................................ available

5. Tool Box .................................................................. stocked with a variety of appropriate tools

4. fire Exgtinguisher ................................................... available

5. Cell Phone...............................................................fully charged

oaT

YsTeMs

1. Bilge Pumps ........................................................... Working. Discharge any appreciable amounts of water

overboard

2. Blowers ................................................................... Working. “sniff” the bilge/engine compartment for fuel

odor

3. navigation lights .................................................... Working. have spare bulbs (and if applicable fuses)

aboard

4. Radio/Electronics .................................................... Working

5. horn ........................................................................ Working

6. Trim Tabs ................................................................ full range of motion. no excessive play or binding

7. fresh Water Tank .................................................. filled and sanitized

8. Carbon Monoxide Detector ..................................... Working

nGine

1. Batteries ................................................................. fully charged (Check water cell levels)

2. fuel Tank ................................................................ filled with recommended fuel; not leaking

3. fuel system ............................................................ Check for leaks

4. fuel filters ..............................................................

Check that filters are clean and tight

5. Diesel Racor fuel filters ........................................

Check that filters are clean, tight and free of water

6. Engine Coolant Drain Plugs ................................... secured

7. steering fluid ......................................................... full

8. Throttle & gearshift Controls .................................. full range of motion

Содержание Islander 242




















































































Результаты поиска

Содержание Islander 242

Отзывы:

Похожие инструкции для Islander 242

Бренды по названию

Популярные бренды

Baja Islander 242, Руководство пользователя

Результаты поиска

Содержание Islander 242

Отзывы:

Похожие инструкции для Islander 242

Бренды по названию

Популярные бренды