29
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red
positive (+) pole of the battery.
(see figure D)
2. Connect the black negative (-) cable to the
black negative (-) pole of the battery. (see
figure E)
Note: The red positive (+) cable has a larger
diameter than the black negative y cable.
3. Charging rate: Charge battery @ 0.7 Amps for
5 ~ 10 hours.
• After charging is complete, press down
firmly with both hands to seat the caps.
(Do not pound or hammer.) The battery is
now sealed. (see figure F)
• Install battery into battery compartment.
The battery terminals should be facing
the front (see figure G)
• Once battery is firmly seated in battery
compartment attach the red positive wire to
the red positive terminal on the battery.
• Then attach the black negative wire to the
black negative terminal on the battery.
• Install the battery cover and straps
(see figure G)
NEVER REMOVE THE STRIP OF CAPS NOR
ADD ANY WATER OR ELECTROLYTE.
Figure D
Figure E
Figure F
Figure G
WARNING
!
BATTERY INSTALLATION
