Baja BA300, Руководство пользователя

Страница: 27 / 32

Baja
™
BA300
27
V I I . C A R E A N D M A I N T E N A N C E
BATTERY TERMINAL CONNECTIONS
„
Make certain that the terminal connections remain tight and uncorroded.
„ The batteries must sit flat in the battery wells.
„
The battery terminals should face away from the seat post.
WIRING HARNESSES
„
Regularly check all wiring connections.
„ Regularly check all wiring insulation, including the charger power cord, for wear or damage.
„
Have your authorized dealer repair or replace any damaged connector, connection, or insulation
that you find before using your scooter again.
PROHIBITED! Even though the scooter has passed the necessary testing requirements for ingress
of liquids, you should keep electrical connections away from sources of dampness, including direct
exposure to water or bodily fluids and incontinence. Check electrical components frequently for
signs of corrosion and replace as necessary.
WARNING! Do not pull on electrical harnesses directly to detach them from the scooter. Always
grasp the connector itself when disconnecting the harness to prevent wire damage.
„ Disinfecting Wipes
„
Clorox, Green Works, PDI Sani-Cloth HB
Wipes, Lysol, Oxivir, Virox, and CaviWipes.
{
For Tire cleaning, clean with off the shelf tire/wheel
cleaners
Electronics
(Joystick controller, enhanced displays, touch
screens, remote controls, keyboards, cell phones and tablets,
as applicable)
●
For electronics, remove visible contamination if present.
{
Turn off product and disconnect batteries.
{
Never spray any liquids directly into the product(s).
{
Moisten a microfiber cloth with a mixture of 70%
isopropyl alcohol/30% water solution. The cloth should
be damp, but not dripping or excessively wet. Dry
surfaces thoroughly to avoid pooling of liquids and prior
to boxing.
WARNING! Follow all safety instructions for the proper use of the disinfectant and/or cleaning
agent before applying it to your product. Failure to comply may result in skin irritation or premature
deterioration of upholstery and/or scooter finishes.
WARNING! Never use any cleaning or disinfecting agent, solvent, lubricant, or any other product on the
brake pads, brake discs, transaxle, motor/gearbox of your mobility product. Doing so may damage the
components and/or cause them not to function properly. Property injury and/or personal injury may
result.
WARNING! Never hose off your scooter or place it in direct contact with water. Your scooter has a
painted, ABS plastic body shroud that allows it to be easily wiped clean with a damp cloth.
WARNING! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become
slippery or dry out and crack. Use soapy water and dry the seat thoroughly.