Baja motorsports Sand Dog 65 Скачать руководство пользователя

Страница: 42 / 44

Your emission control system warranty covers components whose failure

would increase an engine’s emission,

including electronic controls, fuel injection system, carburetor, the ignition

system, catalytic converter, or any other system utilized in this vehicle to

control emission if it is originally equipped. Also included may be hoses,

connectors and other emission-related assemblies. Replacing or repairing

other components (including parts, labor, and other costs) not covered by this

emission control system warranty or the standard warranty is the responsibil-

ity of the owner.

Coverage of repairs under this warranty applies only when repairs are com-

pleted at an authorized dealer or repair facility. The Distributor will not cover

repairs performed outside of an authorized dealer or repair facility. The use of

replacement parts not equivalent to the original parts may impair the effective-

ness of your vehicle’s emission control system. If such a replacement part is

used and an authorized dealer determines it is defective or causes a failure of

a warranted part, your claim for repair to bring your vehicle into compliance

with applicable standards may be denied.

This Emission Control System Warranty is in addition to the standard Limited

Warranty.

EXCLUSIONS AND LIMITATIONS

This warranty does not cover the following:

•

Failures or malfunctions of the emission control systems caused by

abuse, alteration, accident, misuse, the use of leaded gasoline.

•

Replacement of expendable maintenance items unless they are

original equipment defective in material or workmanship under normal use,

and the first required replacement interval for the item has not been reached.

Expendable maintenance items include but not limited to spark plugs, filters,

coolant, lubricants, gaskets, hoses, and belts.

•

Replacements of parts and other services and adjustments for

required maintenance.

•

Any vehicle equipped with an odometer or hour meter where the

reading is altered so that actual mileage cannot be readily determined.

EMISSION CONTROL SYSTEM

WARRANTY

Содержание Sand Dog 65













































Результаты поиска

Содержание Sand Dog 65

Отзывы:

Похожие инструкции для Sand Dog 65

Бренды по названию

Популярные бренды

Baja motorsports Sand Dog 65, Руководство пользователя

Результаты поиска

Содержание Sand Dog 65

Отзывы:

Похожие инструкции для Sand Dog 65

Бренды по названию

Популярные бренды