6
This function is for read at all point time that stored data.
Press " "key, move cursor to in the front of read, press menu key. Press "
△▽△▽
"key again to show each period of time's data one by one, after examining, press
“
run
”
to return beginning state.
G. detection count
After the each item function setting up, and the samplinging outlet is connected
sampler, then detect and count.
Primary display
(2), Menu key
Press
“
run
”
key, enter into test, meanwhile, pump start up, after a minute, it stop, the
screen will display each particle consistence per minute (Add up)
Apparatus reset : after finishing operation, proceed apparatus reset, please
connect filter to samplinging outlet, filter arrow direction points to apparatus sampling
outlet, and come into running state till 0.5
μ
m display for 0, At "Test spot
“
:enter to test
point and name.
Press
“
run
”
key again, enter into next minute test until the continuous operation to
end.
H. 209E determining
After pressing
”
run
“
key to enter into test mode, press"
"Key into 209E
25.5
℃
55%
CLJ03A03
Particle Counter
Baishen Inc.
25.5
℃
55%
Battery
