TMU & TMSU
TM
addendUM To The owner’S ManUal |
CONTROLS
C
O
N
T
R
O
L
S
1 800 463.2187
From 8 a.m. to 8 p.m. Monday to Thursday (EST) From 8 a.m. to 5 p.m. on Friday (EST)
Printed in Canada. Copyright © January 2013 BainUltra Inc. all rights reserved. 45100572
Some products, specifications, and services mentioned in this manual are described
in pending patent applications or are protected by patents.
12
in addition to page 54
of owner’s Manual
TherMaSenS doT ConTrolS
theRmasens
tm
dot contRols
installation
1
7/8 in. hole Saw
2
drill
warmTouchShell doT
Chromatherapy doT
determine the most convenient location, on either
the wall or the deck, to install the control module
or consult the specifications sheet for the suggested
location. To avoid drilling in an electric component,
always check under the deck before drilling. If you
have to install the control to the wall, remove the
protective film of sticker behind the control. you
can add a silicone bead to secure it.
loCaTIon
InSTallInG The ToUChPad
reQUIred ToolS
1
Push wiring through drilled holes.
2
remove protective film from watertight
seal.
3
Secure touchpad into place on either
the podium or the wall by using the nut
supplied.
4
Tighten sufficiently to insure seal is airtight.
• If control is not factory installed, you will find it attached on the turbine, or to the
electronic controls modules
.
warning