Bailey Unicorn Barcelona, Руководство по обслуживанию

Страница: 17 / 26

16
TECHNICAL INFORMATION
UNICORN SERVICE SCHEDULE
In order to validate the factory backed warranty package, your caravan
must be serviced by an approved Bailey Service Centre every 12
months (or within 6 weeks of each anniversary of purchase) in
accordance with the NCC recommended service schedule.
A full listing of the current Approved Bailey Centres can be found on
the Retailer Network pages of our web site @ www.bailey-
caravans.co.uk. Alternatively please contact our Customer Helpline
on 0117-3052939 for details of your local service agent.
ALU-TECH CONSTRUCTION SERVICE SCHEDULE
All Bailey caravans must undergo a full annual service and inspection
from new , including a moisture survey, carried out, by an Approved
Bailey Service Centre in order to validate the warranty. The final
annual service in the warranty period must be carried out before the
end of that warranty period, but all other annual services may be
carried out within six (6) weeks either side of each anniversary of the
original purchase date. The original VAT invoices must be retained
as proof that these annual inspections have been carried out.
Warning: In no circumstances should the body shell fixings be
tampered with or adjusted by the caravan owner. In instances where
this has occurred the warranty will be automatically invalidated.
STANDARD MOISTURE SURVEY FOR ALU-TECH
CONSTRUCTION CARAVANS
The following moisture survey must be carried out using a
calibrated moisture meter every 12 months by an Approved Bailey
Service Centre.
Readings should be taken on the floor section of the caravan in
positions where the holes created by the meter's probe are not
visible, i.e. behind seals, in bedboxes or in cupboard bases. It is
important to make sure that the probes are free of moisture and
the surface of the floor is free from condensation.
Readings below 20% are considered acceptable. Readings
greater than 20% will identify areas needing further investigation
and possibly remedial work.
All other parts of the body of the Alu-Tech caravan should be
checked visually for moisture ingress.
THERMAL INSULATION GRADE
All Bailey Alu-Tech Caravans are manufactured and approved by
the NCC to EN1646-1 thermal insulation and heating classification
Grade III. This has been approved using the caravan space
heater using both the heating and gas as the heating method.
Grade III is classified as being able to achieve an average
temperature difference of 35 degrees centigrade between inside the
caravan and outside when the exterior temperature is -15 degrees
outside.