Bailey Orion, Руководство пользователя

Страница: 35 / 102

3-6
3
Caravan Service Systems
▲ Some industrial LPG appliances operate at high pressure and require a ‘high pressure’
regulator. This often has an adjusting handle on it. Never use such a regulator on a
caravan.
Propane and Butane gas regulators are not interchangeable.
●
Always ensure that the gas system is inspected/maintained every 12 months.
●
In the event of a fire ensure all occupants evacuate the caravan via the nearest escape route.
● If it is safe to do so turn off the yellow isolating valve located in the gas box directly below the
regulator.
●
If you suspect a gas leak then immediately turn off the supply of gas at the yellow isolation tap
located below the regulator in the gas box. Then turn off the gas valve on the gas bottles. When this
has been completed the system must be inspected by a competent person.
●
Never use gas bottles located outside the caravan gas box. Do not use any gas extension hoses.
● Gas barbecue - always use gas appliances that are suitable for use at 30mbar.
Your caravan is fitted with a regulator as standard equipment. This is located in the caravan gas box
mounted on the front bulkhead of the caravan between the gas bottles. The gas regulator has a working
pressure of 30mbar and is suitable for both propane and butane liquefied petroleum gas. There are
dedicated hoses available for different types of gas/bottle. They are also available for camping gas and
other mainland Europe LPG Suppliers. Please contact your Retailer who will have a stock of these
hoses.
3.2.3 Changing Gas Cylinders
Ensure that the cylinder is empty, then:
● Turn off the tap located by the gas regulator.
●
Turn off cylinder valve and all gas appliances.
●
Remove the gas hose regulator from the cylinder.
● Release retaining strap (where fitted).
●
Remove cylinder from gas locker and stand on ground.
●
Fit plastic protecting cap to cylinder.
With the full cylinder:
●
Before placing cylinder in the cradle ensure that the tray is clean and free from any debris. Cleaning
should be carried out only with warm soapy water.
●
Place cylinder in cradle in gas locker.
●
Remove plastic protector from cylinder.
●
Connect the gas hose.
● Connect retaining strap (where fitted).
●
Turn on cylinder valve and then systematically relight appliances as required.