Bailey Infi 90 NTAI02, Инструкция

Страница: 12 / 29

INTRODUCTION
REFERENCE DOCUMENTS
1 - 4 I-E96-403A
®
REFERENCE DOCUMENTS
Table 1-2 contains the reference documents for the NTAI02.
SPECIFICATIONS
Refer to Table 1-3 for the specifications of the NTAI02 Termina-
tion Unit.
Table 1-2. Reference Documents
Document
Number
Description
I-E96-205 Analog Master Module and Analog Slave Modules
(IMAMM03 and IMASM01/02/03/04)
I-E96-406 Analog Master Module Termination Unit (NTAM01)
I-E96-500 Site Planning and Preparation
Table 1-3. Specifications
Property Characteristic/Value
Power Requirements +24 VDC, 10mA per IMASM02.
Mounting Mounts in the Field Termination Panel (NFTP01).
Environmental
Electromagnetic/Radio
Frequency Interference No values available at this time. Keep cabinet doors closed. Do not use
communication equipment closer than 2 meters from the cabinet.
Ambient Temperature 0 to 70
o
C (32 to 158
o
F).
Relative Humidity 5% to 90%
±
5% up to 55
o
C (131
o
F) (noncondensing).
5% to 40%
±
5% up to 70
o
C (158
o
F) (noncondensing).
Atmospheric Pressure Sea level to 3 km (1.86 miles).
Air Quality Noncorrosive.
Cooling Requirements No cooling is necessary when used in Bailey Controls cabinets and oper-
ated within stated limits.
Surge Protection Meets IEEE-472-1974 Surge Withstand Capability Test.
Certification CSA certified for use as process control equipment in an ordinary (nonhaz-
ardous) location.
Specifications are subject to change without notice.