OVERVIEW
I-E96-410A
1 - 1
SECTION 1 - INTRODUCTION
OVERVIEW
The NIDI01 Digital Input Termination Module (IDI) terminates
digital input and output signals for the modules specified
below. Figure
shows an example NIDI01 application.
•
IMASO01 Analog Slave Output Module.
•
IMDSI02 Digital Slave Input Module.
•
IMDSM04 Pulse Input Slave Module.
•
IMDSM05 Digital I/O Slave Module.
•
IMDSO01 Digital Slave Output Module.
•
IMDSO02 Digital Slave Output Module.
•
IMDSO03 Digital Slave Output Module.
•
IMDSO04 Digital Slave Output Module.
•
IMFCS01 Frequency Counter Slave Module.
•
IMHSS02 Hydraulic Servo Slave Module.
•
IMLMM02 Logic Master Module.
INTENDED USER
System engineers and technicians should read this manual
before installing and placing the IDI termination module into
operation. Do
not
put the IDI termination module into opera-
tion until this instruction is read and understood.
INSTRUCTION CONTENT
This manual contains five sections and nine appendices:
Contains an overview of the features, specifications and a
description of the IDI module.
Describes precautions to observe when handling modules and
setup procedures required before module operation. This sec-
tion also discusses jumper settings and installation
procedures.
Contains a maintenance schedule.
Details how to replace an IDI module.
Describes the support services (spare parts, training, docu-
mentation, etc.) available from Bailey Controls Company.
Appendices A through I
List the quick reference information necessary to configure
IMASO01, IMDSI02, IMDSM04, IMDSM05, IMDSO01,
IMDSO02, IMDSO03, IMDSO04, IMFCS01, IMHSS02 and
IMLMM02 modules.
