INTRODUCTION
I-E96-435A
A - 1
APPENDIX A - RTD SLAVE INPUT MODULE
(IMASM03/04)
INTRODUCTION
The RTD Analog Slave Input Modules (IMASM03/04) use an
NIAI03 for termination. Each NIAI03 accepts up to eight
three-wire RTD inputs.
The IMASM03 is a three-wire 100 ohm RTD slave module. The
IMASM04 is a three-wire 10 ohm copper RTD slave module.
This appendix contains figures and tables that show the
dipswitch location on the IMASM03/04 and its settings. This
information is provided as a quick reference guide for person-
nel installing the NIAI03. Figure
shows the address select
switch (SW1). Table
lists the binary addresses for setting
SW1. Refer to the IMAMM03 instruction for more detailed
information to install and configure the slave.
Figure A-1. Address Select Switch (SW1)
Table A-1. Address Switch Settings (SW1)
Addr
MSB
LSB
Addr
MSB
LSB
1
2
3
1
2
3
0
0
0
0
4
1
0
0
1
0
0
1
5
1
0
1
2
0
1
0
6
1
1
0
3
0
1
1
7
1
1
1
OPEN = OFF = 1
CLOSED = ON = 0
T00468A
P2
P3
P1
MODULE
STATUS LED
SLAVE/GROUP
ADDRESS SWITCH
S1
2
1
OPEN
3
