Baileigh WR-84V-ATC, Руководство оператора

Страница: 21 / 56

19
19
Air Connection and Settings
1. Route the air line into the filter side (A) of the filter
/ regulator assembly. The air supply (customer
supplied) should be 9-10CFM @ 85psi.
2. Push the air line into the quick connect and verify
that it is locked into the coupler.
3. Fill the oiler with a quality air tool oil.
4. When the system setup is completed, set the
main pressure regulator (C) to 85psi.
Dust Hose Connections
This machine is equipped with a dust collection port.
Note: A dust collector and ducting
(hose) is optional and not included with the table.
The minimum required air speed at the end of flexible
tube is 20 m/sec. The minimum required air volume of
the machine is 750 m³/hr. (43,000~49,000 cu. ft./hr.).
Use antistatic and electrically conductive hoses only.
IMPORTANT: Use care and planning
when attaching and routing flexible hose for dust
collection. DO NOT create an entanglement hazard or
a trip hazard or an interference of the work station
when routing the hose(s).
The 4” (100mm) dust port is part of and on the top of
the router head.
When connecting the flexible hose, plan for:
•
The hose to travel with the router head when the
machine is in operation.
•
Positioning so as NOT to interfere with the
operator or the work piece.
•
Prevention of the hose from creating a trip or
entanglement hazard.
•
Having the hose secured to the port to prevent accidental detachment during operation.
A
B
C
A