Baileigh WR-105V-ATC, Руководство оператора

Страница: 60 / 76

2
2
1. Local Files
1 Local Files
Program files saved
to memory
2. USB Files
2 USB Files
Program files saved
to USC Disk
3. Operations
3 Operations
1 Back RED Point
1 All Home
2 Z Home
3 X Home
4 Y Home
2 Rect Machining
1 Params Settings
EngrDpth 0.300
EachDpth 0.300
ToolDia 1.000
NoseGap 15.000
Height 3065.000
Width 1540.000
X Init
0.000
Y Init 0.000
Mode Horiz. Mill
------Load Now--
2 Load The Last
Will start the last
program
3 Select Line No
Total : 0
StartLi
0
EndLine 0
-----Execute Now--
NOTICE: While some of these settings are intended to be adjusted by the operator to tune
the operation to the material and cut being performed, other settings are not to be changed
by the operator. If you are unsure of the effect a change to a setting will have on the
performance of the table, do not make the change.
DAMAGE DUE TO INCORRECT SETTING WILL NOT BE COVERED UNDER
WARRANTY.