Baileigh WP-750, Руководство оператора

Страница: 11 / 28

9
9
13. Stay alert . Watch what you are doing and use common sense. DO NOT operate any tool or
machine when you are tired.
14. Check for damaged parts . Before using any tool or machine, carefully check any part that
appears damaged. Check for alignment and binding of moving parts that may affect proper
machine operation.
15. Observe work area conditions . DO NOT use machines or power tools in damp or wet
locations. Do not expose to rain. Keep work area well lighted. DO NOT use electrically
powered tools in the presence of flammable gases or liquids.
16. Keep children away . Children must never be allowed in the work area. DO NOT let them
handle machines, tools, or extension cords.
17. Keep visitors a safe distance from the work area.
18. Store idle equipment . When not in use, tools must be stored in a dry location to inhibit rust.
Always lock up tools and keep them out of reach of children.
19. DO NOT operate machine if under the influence of alcohol or drugs . Read warning
labels on prescriptions. If there is any doubt, DO NOT operate the machine.
20. Sparks and hot material from welding can easily go through small cracks and openings into
adjacent areas.
21. Do not weld where the atmosphere might contain flammable dust, gas, or liquid vapors such
as from gasoline.
22. Wear oil-free protective garments such as leather gloves, heavy shirt, high shoes or boots,
cuffless trousers, and a cap.
23. Watch for fire and keep a fire extinguisher close by.
24. DO NOT touch live electrical components or parts.
25. Turn off power before checking, cleaning, or replacing any parts.
26. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
27. Keep all cords dry, free from grease and oil, and protected from sparks and hot metal.
28. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill!
29. Keep visitors a safe distance from the work area.