Baileigh SF-5216E, Руководство оператора

Страница: 21 / 40

19
19
Installing Front Extension Rails
1. Attach (4) M12 hex bolts and (4) flatwashers to the machined rail
pads as in (fig. 6).
2. Slide the rail onto the capscrews and behind the flatwashers.
3. Line up the rail channel with the channel on the table, making
sure the top machined surfaces are flush.
4. Tighten the capscrews making sure the rails stay aligned to the
table.
5. Fig. 8 below shows the proper installation of the foot pedal, front
rails, work stops, and small workpiece push plate (when
needed).
figure 6
figure 7
figure 8